maintenance, care, compatibility
Each aquarium should have a filtration system that will purify the water, ensuring the health of the fish and plants. As it is known, wastes that are left behind by the inhabitants of the reservoir, as well as the remnants of food, suspended particles of soil are very harmful for fish.
Not eaten feed is oxidized, turning into toxic ammonia. In order for the water to pass through all the steps of cleaning in a timely manner, it is better to make an external filter for the aquarium with your own hands.
It will prevent the appearance of harmful substances that can poison living beings.
Before you make an aquarium filter with your own hands, you should understand how the filtration system works. The biological filtration method in an aquarium is the process by which ammonium is converted to nitrites, then to nitrates.
Biofilation is carried out thanks to beneficial microorganisms that live in the aquatic environment. This process depends on the amount of oxygen absorbed, so it is important to maintain a constant supply of aeration in the tank using a filter and a compressor.
See how the homemade external filter made of plastic bottles works.
To make an external biological filter with your own hands, you should prepare the following materials:
- Plastic bottle of mineral water 0.5 l;
- A plastic tube with a neck diameter of this bottle;
- Compressor and hose to it;
- Aquarium pebbles with a diameter of up to 5 mm.
A plastic bottle should be divided into 2 parts so that fragments of different sizes are obtained from it. It should make a cup with a neck and a big bottom.
The bowl should be directed with the side of the neck up and firmly planted in the bottom. In the outer circle of the bowl you need to make several openings through which water can flow into the filter.
The recommended diameter of the openings is 3-4 mm, their arrangement is in 2 rows, with 4-6 holes in each.
Next, the tube should be inserted into the neck of the bowl so that it entered into it tightly. After the procedure, you should not notice any gaps or holes between the tube and the neck.
The length of the tube itself is chosen taking into account the projection above the structure by 2-3 cm. At the same time, it should not touch the bottom of the bottle.
If the step is done incorrectly, water will not be able to flow into the mechanism.
Take the gravel and put it on top of the bowl with a layer of 6 cm, and cover it with a piece of padding polyester. Install a hose in the tube from the aerator, and fix it. When the mechanism is ready, it must be placed in the aquarium.
Then you should turn on the compressor in order for the filter to start its work. In the existing equipment, beneficial microorganisms will appear that process ammonia into nitrates, which forms a useful microbiological environment in water.
The self-made external filter is constructed on the basis of aerolifting: air bubbles that come from the compressor, rise to the tube, from which they come to the top, and lower with them the water flow from the filter. Clean and oxygenated water enters the upper compartment of the glass, and passes through the gravel.
Then the water enters the bowl through the hole, goes down the tube, and enters the tank. Synthon here functions as a mechanical filter.
This material prevents the silting of the gravel substrate.
External filters chemically and mechanically purify water. It is better to install such structures in a large aquarium with a volume of 200-400 liters.
For more spacious aquariums with a capacity of 500-1000 liters will need several such devices. Branded external water treatment systems are expensive, so it’s best to do it yourself.
Materials are inexpensive and accessible to everyone.
Materials for the simplest internal aquarium filter are commercially available at regular hardware stores. The exception, perhaps, is only a compact electric pump.
However, it can be bought in the building hypermarket or in the electrical goods store.
So, for work will be required:
- plastic container with a tight lid (suitable container for storing bulk products);
- thick porous material or sponge;
- hermetic water pump with a fitting for attachment to the lid of the container;
- ceramic granules or rings for biological filtration (for fine cleaning, simple cotton wool can be used as a filtering element);
- 2-3 suction cups, adhesive resin.
At home, you can make a bottom filter or, as it is called, false. However, this is a more difficult task, which can be done by real craftsmen.
Quite a large number of owners of aquariums prefer not to spend money on expensive equipment. Aquafilters, diligently made with their own hands, work no worse than expensive branded devices.
And the technology and the frequency of their service is the same as in the sold models. In addition, a self-made device has a slightly different moral value.
Is not it?
Video on how to properly make an external aquarium filter: