Главная 7 Aquarium 7 Filter for aquarium how to install

Filter for aquarium how to install

maintenance, care, compatibility

How to install and use aquarium filters

How to install the internal filter in the aquarium :: how long should the filter in the aquarium work :: Equipment and accessories

If you decide to install an aquarium at home, then you cannot do without an aquarium. filter. His choice should be treated with special attention, since the quality of water in your underwater kingdom will depend on this device.

1. Today, there are many varieties of aquarium filters: internal, external, bottom, aerator filters, as well as filters that produce mechanical filter(as filter used filter thread, sponge or crumb), chemical filter(using activated carbon or zeolite), as well as biofiltertion (microorganisms are used in the filter that purify water from harmful impurities).

2. The filter must be selected based on the volume of the aquarium, as well as the functions that it will have to perform. For example, external filters are easy to use, and bottom filters help create a more favorable microflora in the aquarium, and they need to be cleaned every two to three years. For small aquariums, an ideal option would be a filter aerator, which combines the functions of cleaning and saturating water with oxygen.

In any case, before you choose any specific filter, you should consult with a specialist.

3. Before installing the filter, carefully read the instructions. If you purchased a chemical filter, you must fill it with the adsorbent that comes with it.

4. Before installation filter prepare an aquarium. Rinse it thoroughly and fill it with water to see if the seams are leaking. Drain and place pre-prepared soil on the bottom of the aquarium.

If you purchased a bottom filter, you must first install it under the ground. Pour about one third of the water, then plant the plants. If you choose an internal filter, then you need to install it at this very moment.

Attach the filter with special velcro or retaining bracket, then fill the aquarium with water to the required level. An external filter can be installed after filling the aquarium with water.

5. After filling the aquarium, turn on the filter in order to check its operation. While the aquarium will be balanced (about two weeks), the filter must be kept on.

As soon as you see that the water has disappeared from the water, then you can safely inhabit your underwater world with fish.

When buying an aquarium, do not forget that in addition to appeasement from it, you will still take care of its inhabitants and their habitat, that is, an aquarium. Regularly keep it clean.

In order for the filter to work properly and the water in the aquarium was not muddy, with particular attention, approach the question of choosing a filter. It is important that it fits exactly your tank, and its quality was first class.

In this case, you should rely on well-known manufacturers, which will ensure the absence of problems in the future.

If choosing a cleaning system is difficult, seek advice from retailers or professionals. They will share their experiences, talk about the proper care of the fish and their “living space.”

Thus, your purchase will be doomed to good luck.

After purchasing the device, be sure to pay attention to its instructions. Installation of the internal filter in the aquarium is made on the basis of these instructions. It is important that the cleaning system is filled with water at the time of immersion.

Do not forget to temporarily overpower the fish, because they can interfere with the installation process. In addition, residents face a burn: the body temperature of the fish is much lower than the human temperature.

So, immerse the filter in the water column to a depth of 15-20 millimeters. It is necessary that the device is completely in water. After determining the location, attach the filter to the wall of the aquarium.

As a rule, it is equipped with special velcro, thanks to which the installation process is greatly simplified. You can lock the device to the desired position, where it will remain for a long time.

Do not forget that the filter is equipped with a special tube to which the hose is attached. The tube should be outside the aquarium; it is she who plays a crucial role in water purification.

Through this element comes out “used” water, which flows into a mini-hose through a sponge at the end of the filter.

One of the steps in the operation “how to install a filter in the aquarium” is to turn on the device in the outlet. When testing the device, do not forget the safety regulations. Wires must be complete, and the shell on them – intact.

In order to test the operation of the internal filter, place your palm over the top opening of the device. If you feel like water is being pushed out of there, then the filter is working properly.

Observe the cleansing process for a few minutes; malfunctions are often identified immediately.

After the operations done, you can return the fish to their “water kingdom”. Do not forget to mention whether it is comfortable for pets in the aquarium where the cleaning device works.

It is important that the filter does not have a negative impact on the residents.

How to install the aquarium filter :: how to run the aquarium filter :: Equipment and accessories

If you decide to install an aquarium at home, then you cannot do without an aquarium. filter. His choice should be treated with special attention, since the quality of water in your underwater kingdom will depend on this device.

1. Today, there are many varieties of aquarium filters: internal, external, bottom, aerator filters, as well as filters that produce mechanical filter(as filter used filter thread, sponge or crumb), chemical filter(using activated carbon or zeolite), as well as biofiltertion (microorganisms are used in the filter that purify water from harmful impurities).

2. The filter must be selected based on the volume of the aquarium, as well as the functions that it will have to perform. For example, external filters are easy to use, and bottom filters help create a more favorable microflora in the aquarium, and they need to be cleaned every two to three years.

For small aquariums, an ideal option would be a filter aerator, which combines the functions of cleaning and saturating water with oxygen. In any case, before you choose any specific filter, you should consult with a specialist.

3. Before installing the filter, carefully read the instructions. If you purchased a chemical filter, you must fill it with the adsorbent that comes with it.

4. Before installation filter prepare an aquarium. Rinse it thoroughly and fill it with water to see if the seams are leaking.

Drain and place pre-prepared soil on the bottom of the aquarium. If you purchased a bottom filter, you must first install it under the ground.

Pour about one third of the water, then plant the plants. If you choose an internal filter, then you need to install it at this very moment.

Attach the filter with special velcro or retaining bracket, then fill the aquarium with water to the required level. An external filter can be installed after filling the aquarium with water.

5. After filling the aquarium, turn on the filter in order to check its operation. While the aquarium will be balanced (about two weeks), the filter must be kept on.

As soon as you see that the water has disappeared from the water, then you can safely inhabit your underwater world with fish.

An aquarium is a biosystem, a living organism, in order to maintain its viability it is necessary to have special equipment. It is internal and external, basic and additional.

The main equipment is considered to be: compressors that saturate the water with oxygen, filters for water purification, water heaters, to save the selected temperature mode and lamps to illuminate the aquarium.

Internal filters combine two functions: supplying oxygen and purifying water. Internal filters include a pump that pumps water and a filter element, which can be located both outside and inside the filter housing. Installation of the internal filter is extremely simple.

The location of the filter in the aquarium is as follows: it is attached to the side wall of the aquarium, next to the rear window. The pump of this filter must be completely in the water.

Above the surface of the water there remains only an oxygen hose for taking air and passing it through the pump to the aquarium.

External filters are placed in a cabinet – stand. In the aquarium there are 2 tubes for drawing water into the filter and for supplying clean water. The filter consists of a pump that is installed on top of the filter, as well as a filter housing with filter material in it.

During the installation of the filter in the cabinet – stand, you need to make sure that the hoses that connect the tubes and the filter are located freely. The intake tube is placed vertically in the aquarium, about 5 centimeters from the ground, in turn, the tube for feeding water from the filter is installed in the upper part of the aquarium and can be located both under water and above water, taking into account the tasks assigned to the filter.

External filters are designed only to purify water, and a compressor is used to supply oxygen to water.

How to put the filter in the aquarium:

Open the filter, unfasten the covers, then remove the engine.

Pull out the basket with filter elements. In the penultimate basket – activated carbon, remove the packaging from it.

Then put the mesh with coal in the basket.

Lower the basket into the filter.

Reinstall the engine and close the covers.

Install the water intake tube into the aquarium through the technological opening, putting the tip on it beforehand. For fixing you need to use suction cups.

Attach to the tube a hose of the desired diameter. This hose can be immersed in hot water for a short time, so that it is easier to put on the tube.

Additional mounts here is not required.

Place an “in” tap on the hose. Hold the end of the hose in hot water before installation.

Install a water supply pipe in technological opening 2. Attach to it the hose with the smallest diameter “out”.

Taps should be attached to the filter with gray washers.

О admin

x

Check Also

Dutch aquarium – creation and content

The aquarium, in the landscape of which the focus is on lush and dense thickets ...

Dry feed for aquarium fish

It is difficult and dangerous to feed aquarium fish with natural live food. The ecology ...

Aquarium water filtration

The density of fish in home aquariums is usually higher than in natural waters. The ...

Timer for aquarium

Caring for an aquarium is a constant and rather monotonous action, but the clearer their ...

Algae in the aquarium

Algae in the aquarium – This is probably one of the main problems aquarist. There ...

Aquarium fish food – 1 part

Pisces, like all other animals, need food to live, grow and reproduce. Food provides the ...

Choice of aquarium and installation – form, types, types

The shape and types of aquarium There are many varieties of aquariums. First of all, ...

Aquarium decoration in natural style – Aquascape Style

Aquarium decoration in a natural style or Aquascape / Aquascape Style. Aquascaping is an art ...

Natural composition in an aquarium

Natural composition in an aquarium Using plants, stones, gravel, snags and background in a single ...

Aquarium Filters – Filtration Methods

The filter for an aquarium is a life support system for any aquarium. Fish produce ...

Water properties for aquarium – movement, temperature, gas exchange

Reservoirs inhabited by tropical freshwater fish can be very diverse in their dynamic parameters – ...

Nano-aquarium – arrangement, launch, maintenance

Fashionable now the prefix “nano” is now used in aquarism. And not just used, but ...

Aquarium for shrimp – description and device

Shrimp – Aquarium for shrimp – a good alternative solution for aquarists, limited in space ...

Diagnosing Aquarium Fish Disease – A Short Guide

Good day, dear colleagues. We continue to study the most common questions on aquarism, in ...

Handbook aquarist – Sergey Ermolaev

Good afternoon, dear readers! Today I decided to distract from writing articles about aquarium fish ...

Unforgettable Aquarium Design for Maze Fish

Labyrinth, or as they are called – Anabasovye, can breathe not only oxygen like other ...

Spawning behavior of cichlids: facts and assumptions

Quite often, one can hear from aquarists of various stripes that all cichlids, without exception, ...

Unusual design catfish aquarium – everyone will do it!

Hello, friends! Somiki are an indispensable attribute of almost any aquarium. Quite often, you can ...

How important is oxygen in an aquarium and how to ensure it biotope

Good day, dear colleagues. glad to welcome you again on my blog. Today I want ...

Create an aquarium design for cichlids in the home pond

Hello, dear colleagues. I am glad to welcome you again on my blog and today ...

Aquaria in Brazil – Fisheries

Dear colleagues! Today I will not talk about aquarium fish or plants. This post will ...

Frequently asked questions about aquarism – Part 3

Hello, dear readers. We continue to fill in the “Aquarium Habit” rubric and I have ...

What is Paludarium and how to equip it at home

Hello, dear subscribers and readers Aquablog. The topic of today’s article will be called “Paludarium”. ...

Algae in the aquarium and what may be due to their problems

Hello dear colleagues, I am glad to welcome you again on my blog reading articles ...