Главная 7 Aquarium 7 DIY Aquarium Table

DIY Aquarium Table

maintenance, care, compatibility

Tumba under the aquarium and everything you need to know about it.

Many craftsmen themselves are trying to create coasters of wood, chipboard, make good wrought iron thumbs for the aquarium, which look spectacular and well suited for small tanks. But often inside the home-made furniture looks like a big box, which is not very suitable as a reliable support for a heavy container filled with water.

In addition to the attractive type of cabinet, a round or rectangular aquarium should meet several other critical requirements.

For a start, prepare well the floor where the support will be installed, the surface of the coating should be without unevenness, as smooth as possible. It is also desirable to make the tabletop of our stand not from a simple chipboard, but from a laminated material or wood.

It should not suffer from spilled water or sag under the weight. The dimensions of the cabinet under the aquarium of solid wood should not exceed the size of the tank so that the load is evenly distributed on the vertical wallsand.

The height of such a stand should not be large, otherwise the design will turn out to be unstable. If the curbstone you are doing above 90 cm, then the back wall should be further strengthened. Overall and long aquariums require even more caution.

To eliminate the deflection of the table top, additional vertical partitions should be installed inside the bollards. Free space can be filled with various shelves, which will make the product only stronger.

In the back, closed from the view wall of the pedestal under the aquarium, holes for hoses and wiring are made. This allows you to hide communications that go from water to additional equipment.

The appearance of the furniture only benefits from this.

Now, perhaps, you will not find a home aquarium, standing directly on the floor. It is always installed on a special stand – a curbstone.

Of course, the 15-liter tank for ornamental fish can be put on a regular table or on a TV stand. But, according to the aquarists themselves, starting with a 50-liter can and above, the bollard is a must.

Moreover, it should not be a chest of drawers for clothes sold in a furniture store, but a special stand.

What is the reason?

But the thing is: constant pressure, for example, a 100-liter aquarium, is so great on the stand that its surface can bend over time, and even a slight deflection will necessarily cause a breakdown of the glass structure.

Simply put, the glass will crack at best, and burst at worst. Consequently, the main difference between an aquarium stand and ordinary dressers or coasters is the large number of vertical internal supports that do not allow the table top to sag.

The second feature is the material for the drawer. It must be waterproof (especially the tabletop), as when servicing the home aquatic system, minor spills are inevitable, and this threatens to deform the surface.

Therefore, it is better to use laminated MDF (fine fraction) or chipboard (chipboard).

Is it easy to find on sale a ready-made cabinet that meets all these requirements? Probably, for some standard aquariums, you can pick up a stand in specialized stores.

And if the aquarium is non-standard? In this case, it is recommended to make it yourself.

Not particularly and difficult task for an experienced home wizard.

The aquarium in the house is a calm and measured world, which is recommended even by psychologists as a wonderful sedative. It is easy to buy a glass cube and fish for it, problems arise only in its location in the apartment.

If we are talking about a small aquarium with a volume of about 20 liters, it is easily placed on a regular table or nightstand, only if the surface is level. But an aquarium with a significant amount of household table will not hold.

Therefore, there was such a thing as a stand under the aquarium, which is a reinforced structure, fitted in size and color.

Stands for aquariums, their types and rules of manufacture

Finally, we describe a somewhat unusual type of furniture that rescues lovers of fish living in modest rooms. Qualitatively assembled custom-made cabinets for an aquarium look great, manufacturers know how to handle edges, cover material with paint and varnish, paint facades in white, black, wenge or other wonderful shades.

But the shape of the product also plays a huge role. Because of their size, rectangular structures sometimes constrain the owners of small apartments.

A good way out is the acquisition of angular pedestals for an aquarium.

Of course, in this case the reservoir should also be triangular in shape, which initially confuses some aquarists. If you put your favorite thing in the room nowhere, but there are free corners, then this option will be an ideal way out. Visually, you get an excellent solution that does not require much space and allows you to contain even large fish.

Large distortion is practically not observed, maybe from a very small distance, and, importantly, a triangular aquarium is perfectly visible from all points of the room.


It is always interesting to observe the living inhabitants of the underwater world for both adults and children. The natural desire of each owner of ornamental fish to an aquarium, which has a beneficial effect on the homely atmosphere of comfort and peace, served as long as possible. And it largely depends on how firmly the artificial reservoir is.

So it turns out that the pedestal, on which the aquarium is installed, performs not only a decorative function, but also plays an important role in maintaining the aquamira in good condition.

If you decide to start aquarium fish and even bought a house for them, then you will always have a question: where to put the aquarium? You can, of course, go to the store and purchase any bedside table or table you like. However, it is much more interesting to make such a pedestal for an aquarium with your own hands. We should not forget that on such a pedestal there will be a rather heavy aquarium with water, soil, and various decorative elements.

Therefore, the cabinet, above all, must be reliable and durable. In no case should she bend, as this is fraught with unpleasant consequences.

As experience shows, in order to make a cabinet for an aquarium, we will need the following materials:

  • wooden blocks of 100×50 mm – 3 pcs;
  • 10 mm thick plywood sheet, 152×152 mm in size – 2 pieces;
  • self-tapping screws for woodworking 3.5 mm and 7.5 mm;
  • varnish;
  • waterproof paint;
  • decorative rail;
  • linseed oil.

The height of our homemade pedestals for the aquarium will be 75 cm, length – 92 cm, width – 50 cm.

  1. First you need to cut the size of the workpiece from the bars for the top of our product and for the legs of the future cabinets.
  2. After that, you can begin to connect the workpiece. We do this by drilling a hole to the middle of the bar, and then we screw the screw into the hole.
  3. In the same way we fasten eight legs to the top of the product.
  4. Made the frame should be well saturated with linseed oil.
  5. From plywood scraps we make holders for the shelf and fasten them from the inside on legs.
  6. To give the structure stiffness below, we attach a plywood tabletop.
  7. Insert the upper and lower plywood shelves, which will also help to strengthen the thumbs. And for the strength of the lower shelves on the inside of the legs, we nail the slats on which these shelves will rest.
  8. We paint the whole structure with waterproof paint. Let the paint dry well.
  9. It was the turn of the plating of the future thumbs. First we sew sidewalls with plywood, then we attach the strips on top and bottom of the front part of the stand. After that, we attach the plywood strips on the back and on the table top.
  10. Now we sew up the middle part between the doors and attach the doors themselves.
  11. We decorate the bollard with decorative rail and corners. Attach the handle on the door.
  12. Cover the cabinet with varnish in 2-3 layers.

Here is our strong and beautiful cabinet for the aquarium.

Aquarium decorates the room, it can also become a compositional center for the interior of the room. In addition to the decorative function, aquariums have one more thing: observing the inhabitants of the “reservoir” acts surprisingly soothingly and fascinatingly, adjusts to calm thoughts, relaxes and pacifies.

When the general idea of ​​what shape the aquarium will have, what will be its shape, who will become its inhabitants, you need to think about the place where the aquarium will be located. In addition, the aquarium should stand on a solid horizontal support.

If there is no bedside, you can do it yourself.

Modern manufacturers, most often, sell a complete set – an aquarium can be purchased with a cabinet corresponding to its weight and size. As an option, the owner makes a support for the aquarium himself.

This significantly affects the cost of the aquarium. After all, it is necessary to purchase equipment that also costs a lot.

Tumba under the aquarium with his own hands is done in accordance with the size of the aquarium. It must meet the standard requirements: be strong, do not bend, not stagger.

The integrity of the aquarium depends on the stability and strength of the support – a sagging tabletop will lead to the deformation of the walls, the appearance of cracks, and the flow of the aquarium.

No one wants to once find all of their pets on the floor due to the fact that the aquarium has burst, unable to withstand the increased load on the walls.

The cabinet for the aquarium with their own hands can be made of old furniture. The main parts are cut according to the prepared drawing, sealed, polished and painted.

It is good if shelves are provided in such a homemade cabinet — they will help increase the rigidity of the structure. Do not forget about the holes in the rear wall – for the wires and hoses of aquarium equipment.

О admin


Check Also

Aquarium Heater

Heater or heater for aquarium For the normal functioning of the ecosystem of the aquarium ...

Aquarium Decoration – Terraces

Terraces in the Aquarium Aquarium terraces are one of the popular decorative elements. The terrace ...

Aquarium Water Quality – Nitrogen Cycle, Filtration

In the amateur hobbyist circle, the term “water quality” means the amount of water polluting ...

Equipment for the aquarium – 1 part

In recent years, the quantity and range of aquarium equipment, commercially available, grew exponentially. Therefore, ...

How to run a nano-aquarium?

Nano aquarium – This is the newest direction of aquarism, rapidly gaining momentum. Nano-aquariums combine ...

Aquarium decoration

We have already discussed in the previous article how important it is to properly understand ...

Frozen feed – nutrition and benefits

Many aquarium fish can only eat dry food, but even for them regular inclusion in ...

Starter Feed for Fry – Infusorian Slipper

Ciliates-slipper refers to the type of ciliates (Infusoria), which has more than 7 thousand species. ...

Water for aquarium – chemical indicators – hardness, PH

There is every reason to believe that aquarium water is the most important part of ...

Breeding aquarium fish – breeding methods

Breeding aquarium fish (general) For breeding fish in an aquarium, you need to have the ...

Reproduction of aquarium plants – Types and methods

Plants in an aquarium not only give it a unique look and personality, but also ...

Aquarium where to start – what kind of fish to get

You have decided to become an aquarist, or at least dream about it. You may ...

Aquarium in the interior – the choice of aquarium and fish

The aquarium is an amazing decorative element in a modern interior, it adds uniqueness and ...

Create an aquarium design for cichlids in the home pond

Hello, dear colleagues. I am glad to welcome you again on my blog and today ...

Algae in the aquarium and what may be due to their problems

Hello dear colleagues, I am glad to welcome you again on my blog reading articles ...

FAQ on aquarium water and biochemistry in an aquarium

Good day, dear colleagues. We continue to fill the heading of frequently asked questions about ...

How is the catch of aquarium fish in the Amazon

Good day, dear readers! Today we will not talk about aquarium fish, plants and other ...

Frequently asked questions about aquarism – part 1

Hello, friends! Starting today, I am launching a new category – frequent aquarium questions. In ...

Aquarium fish as a barometer for a fisherman

An experienced fisherman always remembers the truths associated with fishing. Pros of the business – ...

Algae in the pond: prevention and how to get rid of them

Good day, dear colleagues. In today’s article I would like to touch upon the topic ...

How to make an aquarium with silicate glass

I welcome you, dear readers on the pages of the blog aqua-blog.com.ua and as you ...

Frequently asked questions about aquarism – Part 3

Hello, dear readers. We continue to fill in the “Aquarium Habit” rubric and I have ...

Frequently asked questions about aquarism: light and temperature

Good day, dear readers! We continue to get acquainted with the Frequently Asked Questions section ...

Frequently asked questions: part 7

We continue to study the topic of frequently asked questions from novice aquarists, and today ...