The originality of the design of the aquarium depends largely on the way the design of the back wall. It is he who creates the similarity of the artificial reservoir with the natural seabed, gives mystery and originality.
Allows you to adjust the intensity of illumination, creating a visual division of space into separate zones.
Of course, in some cases, aquarists prefer to equip a water house without a background. This option is for lovers of bright transparent solutions that demonstrate the impeccability of water care and a rich natural flora to the maximum.
However, in most cases, the design of the back wall is still resorted to, especially since it can be done in bright colors.
If you liked the video – share with friends:
On the back wall of the aquarium the easiest way is to glue a decorative film depicting a marine background. Underwater reefs and caves, rock fragments and the remains of sunken ships, overgrown blocks of exotic marine plants and impeccable color compositions of water layers – this is the minimum that the decorative background is capable of.
Selecting the landscape, it is worth deciding whether the image of fish is desirable or only the plant-water background in the aquarium. Stopping on the “relief background” variant, the plants are selected independently, arranging them according to botanical features (size, peculiarities of growth, etc.).
The volumetric pattern on the background allows you to create a 3d effect that supports the feeling of a real underwater world.
A similar option is to paint the back wall with a special paint for glass. It gives a dark blue background at the back, on which plants of a light green color and fish with a metallic sheen look bright and expressive. The sea will not leave anyone indifferent.
And plus sand – the background is able to visually increase the width of the aquarium. The monochromatic background will visually make the artificial sea endless, and the background neon will also add exotics.
Attention should be paid to the background when tubes of pumps, filters and thermostats are pulled inside the water. Without a background, such an aquarium is uninteresting and simple.
The background jungle is quite capable of visually hiding unnecessary elements for design.
Backgrounds for the design of the far wall can be internal modifications. In this case, glue the background to the aquarium should be before filling with liquid and settlement of fish.
There are many options for such design. The bottom of the sea on the background can be done with:
- PVC plates;
- polyurethane foam;
- epoxy resin;
- cork bark;
- foam concrete and other materials.
How to make the background in this way? Quite simply, if you apply fantasy, elementary abilities to cut relief on surfaces with a cork structure and correctly glue the most functional places.
Original backgrounds are obtained in square and rectangular aquariums, as well as with a curved front wall.
Looks good attached to the bottom and partially to the back wall. In its manufacture, not only cutting methods are used, but also the sticking of separate components imitating, for example, seashells, stones, sunk remnants of ships into the sea, with special aquarium glue.
In this case, the 3d effect will be real.
Making a cork bark landscape on the back is a similar design option. However, before gluing the background of the aquarium, the cork layer should be trimmed around the perimeter, excluding coarse surface irregularities.
The background of the water evens out minor visual defects, but, for example, the neon hue of the backlighting may stress them unprofitable.
Another solution to the question: “is the background for an aquarium?” Implies to glue various stones, snags, rapana onto a PVC plate (preferably according to the size of the back wall). Stick on silicone rubber. Individual elements should not just lean against the surface, but gently push inward.
Background “stone” is advantageous to choose for an aquarium with cichlids. Then the inner background is the artistic continuation of their individual world.
How to glue the background to the aquarium, if it has a vertical component? Silicone sealant and a large contact area are needed (achieved by leveling the surface of an artificial decorative wall).
The background can be a cylinder of foam, extruded on a sheet of polyethylene. To achieve practicality of attachment, you can use a primer to weight the entire panel. Secure it with silicone glue or epoxy resin.
Wavy tuberosities or reefs that are found on the true sea will be suitable for the background.
The background for the aquarium can be originally designed from natural oak bark. It is eco-friendly, safe and practical.
Fishes on such a background look bright, expressive and natural.
In the background you can use slate, foam, and even carpet. Such a background on the aquarium requires additional processing with special coloring waterproof substances.
To choose an option: without a background or “background – design” is a personal matter of every aquarist, his taste, individual views and desire to follow modern trends. One opinion is common: in the aquarium without a background, it is much more difficult for the fish to hide, and for many of them it is just as necessary to sleep or eat.
Therefore, all the nuances should be taken into account!
If you liked the video – share with friends: