maintenance, care, compatibility
How to calculate aquarium volume :: aquarium volume calculator :: Equipment and accessories
How to calculate the thickness of the glass for the aquarium
Calculation of glass thickness for aquarium: a table that can help
It is not necessary to create difficulties for yourself from scratch. Experts have long calculated the thickness of the usual glass for the aquarium and tabulated the results in the table. Here is a well-reviewed table with many reviews, you can take note:
Stiffeners and screeds increase the strength of the aquarium. These are strips of glass about 2.5 cm wide, additionally glued from above flat to the front and rear walls, relieving tension and cleaning deflections from them.
For long aquariums, they are simply necessary.
It is not necessary to use this particular plate, there are many others, both general and separate for the bottom and walls.
The most “advanced” option is to calculate the thickness of the glasses on the aquarium calculator. It is not only very convenient, but also correct!
After all, not all ordinary aquarists can understand the accumulation of complex formulas that go beyond the average knowledge, and even calculate everything on paper, not to mention “in mind”.
The developers note that the calculation is made with substantial reserves. And if suddenly as a result you get zero, then it is recommended to contact the experts with this question.
Aquarium calculator significantly simplifies life – entered the data, pressed the button, got the result! And in conclusion we say: no matter how you use it, do not be lazy to double-check the results, because it is better to spend more time on calculations and checking than on repairs and rework.
❶ How to determine the volume of the aquarium :: Apartment and Cottage :: Other
The guidelines for breeding aquarium fish usually indicate how many liters of water are needed per pair. There are species of fish that will never grow to their normal size in a small vessel.
For some guests, a too-tight “home” can be disastrous. Therefore, the volume of the aquarium must be calculated in advance.
You need to know it in the event that the fish are sick. Doses of drugs are also calculated on the volume.
The question “how to restore the certificate of registration of ownership of 1/4 apartments, the type of registered right is a common shared ownership” – 1 answer
- – ruler, tape measure or measure tape;
- – measuring vessel;
- – calculator.
1. Decide which volume you need – geometric or actual. The first is calculated in the same way as the volume of a geometric body of the corresponding form.
Measure the length, width and height of the aquarium and multiply them. For measurements it is most convenient to use a tape measure or a measuring tape. This method has several drawbacks.
Thus it is convenient to calculate the parameters of a rectangular or square vessel. But modern aquariums have the most bizarre form, and this method is not always suitable.
In addition, water to the brim in the aquarium is never poured. And there are stones and shelters for some fish, and they also take volume.
2. Get measured dishes. You will need it in the future.
This can be a vessel with tick marks or even an ordinary bucket or can, the volume of which you know. Measuring vessel allows you to determine the volume more accurately.
Before settling the fish, you will still fill the aquarium with water. In many cases, this needs to be done several times. For example, when testing a homemade aquarium for tightness.
But it is more convenient to calculate the volume immediately before settling the fish, when you have already processed the soil, stones and decorative elements.
3. Place the soil, shelter and bulk jewelry. You can put on one of the walls mark, to which you will pour water.
Type water into the measuring dish and gently pour it into the aquarium. Fill your reservoir to the desired level, not forgetting to count how many times you have emptied the measuring vessel.
Multiply its volume by the number of times. The advantage of this method is that it allows you to accurately calculate the volume of water in a vessel of any shape.
Usually the volume of the aquarium is determined in liters, so it may be necessary to convert the units of measurement, if suddenly there are other data on the measuring dish. In the international system, these are cubic meters or cubic centimeters. Use the table of units of measurement of physical quantities.
Pints or cubic inches can stand on English or American dishes. Such measuring vessels are not found every day, but sometimes they come across.
The very method of calculating the volume of this does not change. Calculate the number of units and translate it into the international system using a table and a calculator.
If the aquarium is very large, take a bucket as a measuring dish. You can pre-determine its exact volume using the same measuring utensils. Mark the height you poured