Главная 7 Aquarium 7 A series of internal filters for aquariums FAN from the manufacturer Aquael

A series of internal filters for aquariums FAN from the manufacturer Aquael

Filters for aquarium from Aquael from the FAN series is a good choice for a beginner. They just exploit.

They are easily mounted and consume a minimum of electricity, and maintenance does not require special skills. All models are quite simply fixed, they reliably filter water in freshwater aquariums from three to 250 liters.

For large volumes, you should purchase a filter from another series.

Aquan’s FAN Aquarium Filters are easy to use even for beginners.

The series includes five models of Aquael filter aquarium. They differ in terms of power, performance and serviced volume:

The latest model from the list has the highest characteristics. More detailed indicators of each filter for Aquael aquarium in the table:

Model namePower, W)Maximum productivity (l / h)Aquarium volume
microfour250up to 30

In order for the Aquael internal aquarium filter to work most efficiently, it is necessary to install it three to four centimeters below the water level. This situation will also ensure the full saturation of the fluid with oxygen. Placing the filter below is not practical., however, when properly installed, do not forget about the evaporation of water.

Installing the device, you need to understand that the liquid evaporates all the time, and the fullness of the aquarium decreases. Letting the filter be in the air is not worth it – it is not safe for fish.

However, the lower the device is located, the less efficient aeration occurs.

The filter is attached directly to the inner wall of the aquarium; for this purpose, several suction cups are placed on it. For additional fixation, the set includes a holder in the shape of a letter K. It can be used both separately and together with suction cups. The aeration tube should always be above the water level.

The plastic holder is convenient because it has a hole for mounting.

If you liked the video – share with friends:

Some fish can not normally exist without conditions that are very close to natural. One of the important factors is the presence of flow. Its strength can be adjusted with a special handle, which is shallow under water.

The enrichment of water with air also depends on the intensity. The smaller the flow force, the weaker the aeration.

Depending on the specific needs of the filter design can be changed. The basic kit includes the following elements:

  • glass filter;
  • sponge;
  • suction nozzle;
  • power flow control;

The complete set of the filter can be changed depending on requirements.

  • pump;
  • rotor;
  • flow deflector;
  • aeration tube;
  • aeration regulator;
  • holder;
  • suckers;
  • holder;
  • aeration nozzle.
  • To make aeration more efficient, a special nozzle should be mounted on one side, and the regulator on the opposite side. Turning clockwise and counterclockwise changes the amount of intake air.

    Instead of a hose, you can use a compressor. Then the device will operate completely silently.

    If you liked the video – share with friends:

    Fix suckers easy. They need to be inserted into the holder and scroll.

    The design of the perforated rod is special in that the water coming from the aquarium is not concentrated in the upper part, but is distributed along the entire length. Although the internal filter of the MIKRO modification works with the smallest aquariums in volume, it functions normally at a depth of three centimeters.

    Because of this, it is well suited for terrarium pools, palladiums and aquaterrariums. In such forms, they purify water well, although other filters could not withstand such conditions.

    The filter is fixed with suction cups.

    Any Aquael internal filter must be serviced promptly. To make the device work well, you need to regularly clean the rotor and its camera, as well as the sponge.

    This is the only way to achieve perfectly clear water in the aquarium.

    If you forget about cleaning for a long time, then the flow through the filter weakens, as dirt prevents the movement. However, taking care of the mechanism is just, you just need to follow a few simple rules.

    Clean the filter with a power cut. After the plug is pulled out of the socket with dry hands, the filter can be removed from the holder on the suction cups and removed from the water.

    Disconnect the glass from the filter head, this is done by gently squeezing the sides. The disconnected part is washed in clean water.

    In the FAN 2 and 3 models, the glass is complicated with an attached plastic prefilter. He also needs to be cleaned of dirt.

    If you liked the video – share with friends:

    The sponge must be removed from the perforated rod and washed in water drained from the aquarium. The frequency of the procedure depends on the population density of the vessel. Sponges are made of large-pore foam, which well delays the waste of fish.

    It performs the function of both a mechanical and a biological filter — on a porous surface there are ideal conditions for the life of nitrifying bacteria, which actively reproduce due to this.

    Beneficial microorganisms oxidize ammonia and nitrite, but they vividly react to certain chemicals. Tap water kills bacteria. Because of this, biological filtration stops working.

    This can be avoided by using water drained from the aquarium.

    If you turn off the filter for a long time, it can lead to the death of beneficial bacteria

    Good bacteria can die for another reason. For example, a long pause in the operation of the filter will most likely lead to its partial or complete sterilization.

    For the life of microorganisms requires a large amount of oxygen. If you turn off the device for more than four hours, then all bacteria will certainly die.

    After that, it is necessary to repeat the cleaning and launch, because the mechanism is contaminated with single-cell corpses.

    Sponges also suffer from physical wear, and they almost do not change externally. Because of this, do not forget to regularly replace the filter material.

    If you do this in a timely manner, the water in the aquarium will always be clean and enriched with oxygen, which is very useful for fish.

    If you liked the video – share with friends:

    Approximate schedule of care for the device

    operation name / frequency of actionsweeklytwice a monthonce or twice a year
    washing filter cupnecessarily
    sponge washnecessarily
    cleaning the rotor and camerano less than monthly
    replacement of filter materialrecommended, if necessary more often
    suction cup upgradeif necessary

    The devices are equipped with a sealed synchronous motor, which does not require complicated maintenance. About two times a month you need to disassemble the rotor chamber and remove it, and then clean the part together with the empty cavity.

    Reassemble in the reverse order. When properly installed, the rotor rotates freely.

    Large-pore sponges from the manufacturer are not deformed and do not lose their appearance even after a year of continuous operation. However, the filtering efficiency at this point greatly decreases.

    To keep the aquarium clean, you need to change the filter fiber twice a year.

    To maintain quality filtering, you need to regularly change the filter fiber.

    Rubber loses its elasticity under the influence of water, and the suction cups no longer fit snugly to the glass. The deeper the aquarium, the more troublesome will lead dismissive attitude to the replacement of this element. New suckers put as wear, usually annually.

    To cushion more powerful models, special rubber mounts are available to reduce vibration.

    The effect of a waterfall and the murmur of water can be arranged with a flute. A sprinkler also enhances oxygen enrichment.

    Flutes for all models of filters help purified water to be distributed evenly.

    The Mini UV mini-sterilizer exposes water to short-wave ultraviolet radiation, resulting in the death of pathogenic bacteria and tiny algae. No need to keep the device on all the time. The sterilization procedure is carried out only a few hours on one day of the week.

    If necessary, you can do it more often. For example, if the fish began to hurt or there was a slight turbidity caused by the vital activity of bacteria. The sterilizer is mounted on the filter outlet nozzle.

    Inside the device there are four ultraviolet LEDs. Given the lack of need for additional maintenance and the availability of an autonomous power supply, this is an ideal choice for the Micro, Mini and 1 models.

    If you liked the video – share with friends:

    О admin


    Check Also

    Lamps for aquarium

    For the full development and growth of plants and fish it is necessary to ensure ...

    Aquarium Filters – Filtration Methods

    The filter for an aquarium is a life support system for any aquarium. Fish produce ...

    How to choose an aquarium – Size, Shape, Material

    The impression that the aquarium will produce largely depends not only on its size and ...

    Round Aquarium – Content Features

    Round Aquariums do not lose popularity for many years. This is due to their compactness, ...

    Aquarium Water Quality – Nitrogen Cycle, Filtration

    In the amateur hobbyist circle, the term “water quality” means the amount of water polluting ...

    Water properties for aquarium – movement, temperature, gas exchange

    Reservoirs inhabited by tropical freshwater fish can be very diverse in their dynamic parameters – ...

    Algae and the fight against them

    The first living organisms appeared more than 3 billion years ago in the aquatic environment, ...

    Choosing and buying fish for an aquarium – part 1

    Some scientists believe that the total number of fish species in the world’s waters is ...

    How to run a nano-aquarium?

    Nano aquarium – This is the newest direction of aquarism, rapidly gaining momentum. Nano-aquariums combine ...

    Aquarium for shrimp – description and device

    Shrimp – Aquarium for shrimp – a good alternative solution for aquarists, limited in space ...

    Starter Feed for Fry – Infusorian Slipper

    Ciliates-slipper refers to the type of ciliates (Infusoria), which has more than 7 thousand species. ...

    Rules for feeding aquarium fish

    Beginners aquarists, without having the necessary experience, often make a mistake – they overfeed the ...

    Unwanted guests in the aquarium – pest organisms

    It happens that aquariums are invaded and populated by “pest” organisms that cause fears to ...

    Create an aquarium design for cichlids in the home pond

    Hello, dear colleagues. I am glad to welcome you again on my blog and today ...

    Aquaria in Brazil – Fisheries

    Dear colleagues! Today I will not talk about aquarium fish or plants. This post will ...

    Unforgettable Aquarium Design for Maze Fish

    Labyrinth, or as they are called – Anabasovye, can breathe not only oxygen like other ...

    What is Paludarium and how to equip it at home

    Hello, dear subscribers and readers Aquablog. The topic of today’s article will be called “Paludarium”. ...

    Algae in the aquarium and what may be due to their problems

    Hello dear colleagues, I am glad to welcome you again on my blog reading articles ...

    Unusual design catfish aquarium – everyone will do it!

    Hello, friends! Somiki are an indispensable attribute of almost any aquarium. Quite often, you can ...

    Frequently asked questions about aquarism – Part 3

    Hello, dear readers. We continue to fill in the “Aquarium Habit” rubric and I have ...

    FAQ on aquarium water and biochemistry in an aquarium

    Good day, dear colleagues. We continue to fill the heading of frequently asked questions about ...

    Algae in the pond: prevention and how to get rid of them

    Good day, dear colleagues. In today’s article I would like to touch upon the topic ...

    How is the catch of aquarium fish in the Amazon

    Good day, dear readers! Today we will not talk about aquarium fish, plants and other ...

    Frequently asked questions about aquarism – part 1

    Hello, friends! Starting today, I am launching a new category – frequent aquarium questions. In ...